General Information
April 2020 1-18 06-237619-001
1-13 REFERENCES
At present, the below mentioned international standards are in force but any subsequent
changes to the relevant standards must be observed and supersede this list.
• NFPA 2001, 2015 Edition.
• ISO 14520 part 1 / EN 15004 part 1 General requirement
• IG-55: ISO 14520 part 14 / EN 15004 part 9
• IG-100: ISO 14520 part 13 / EN 15004 part 8
• LPS 1230 - LPCB
• AS 4214 – Standard Australia
1-14 APPROVALS
The approval(s) required for installation of a Kidde IGS system may vary from country to
country.
Local fire authorities should always be contacted for their input.
A number of international as well as local authorities around the world have approved the use
of Kidde IGS systems for fixed fire protection systems. This system has been approved for use
as a fixed (total flood) fire extinguishing system.
To Next Page
Loading...
Need help?
General
