Kinematic Matrix 2360 - Page 65

Matrix 2360 Programmable Shear User Manual - Section 7
12-092600 A 57
Removal Tools:
▪
5
/
32
” or
3
/
16
” Hex Key Wrench, for the Chute screws
▪
7
/
64
” Hex Key Wrench, for the Drive Bar
▪
9
/
64
” Hex Key Wrench, for the Static Control Bar Bracket
Cleaning Supplies:
▪ Clean, dry cloth
▪ Cotton swabs
▪ Soft wood scrapers
▪ Cleaning solvent (denatured alcohol is recommended)
▪ Lubricant (White Lithium grease, see Section 7.8)
▪ Lubricant syringe (see Section 7.8)
Sharpening Tools (Blade Sharpening Kit, Kinematic P/N 19-036455, see image in
Section 7.5):
▪ Diamond hone, fine (medium or course may be required for damage
repair)
▪ Grit stones: Fine and UltraFine
▪ Blade sharpening fixture, Kinematic P/N 21-036455: Assy., Blade
Sharpening (See Section 7.5.)