Kohler KDI 1903M - Information about Optional Components; Oil Dipstick in Cylinder Head

INFORMATION ABOUT OPTIONAL
COMPONENTS
11
145
EN
11 INFORMATION ABOUT OPTIONAL
COMPONENTS
11.1 Oil dipstick in cylinder head
Important
•
Before proceeding with operation, read Par. 3.3.2.
11.1.1 Check
1.
Pull out the dipstick B in the direction of the arrow
A.
2.
Check that the mark left by the oil on the dipstick
is between the MIN. and MAX. notches.
Fig 11.1
11.1.2 Replacement
11.
1.2.1 Disassembly
1.
Undo the screw D.
2.
Pull out the oil dipstick hose E in the direction of
the arrow F.
Fig 11.2
11.1.2.2 Assembly
Important
•
Always replace the gasket G every time it is
disassembled.
1.
Insert the gasket G in the seat K of the hose E.
2.
Insert the hose E in the crankcase H.
Fig 11.3