Kohler KDI 1903M - Cooling Circuit (Replacement)

11
INFORMATION ABOUT OPTIONAL
COMPONENTS
EN 166
11.13.1 Disassembly
1.
Undo the screw A.
2.
Undo the nuts B.
3.
Remove the muffler C.
Fig. 11.57
11.13.2 Assembly
1.
Position the gasket D and the muffler C on the
intake manifold E.
2.
Position the muffler C on the bracket F an
d
tighten the screws A (tightening torque at 25 Nm).
3.
Tighten the nuts B (tightening torque at 25 Nm).
Fig. 11.58
11.14 Cooling circuit (replacement)
Important
•
Before proceeding with operation, read Par. 3.3.2.
11.14.1 Radiator disassembly
1.
Release the clamp A.
2.
Remove the sleeve B.
Fig. 11.59