Kohler KDI 1903M - Oil dipstick on cylinder head; Air filter check

2
TECHNICAL INFORMATION
EN 30
NOTE
: Click by side to play the procedure.
https://www.youtube.com/embed/5HuLfSg
qz6s?rel=0
2.10.2 Oil pump
The oil pump rotors are trochoidal (with lobes) and are
activated from the crankshaft by means of the key. The
pump body is situated inside the distribution guard.
It is imperative to assemble the rotors with reference A
visible by the operator.
Tab 2.21
POS.
DESCRIPTION
1
Internal rotor
2
External rotor
3
Oil pump crankcase
4
Pump control key
5
Timing system crankcase
6
Crankshaft
Fig 2.15