7.6 Mains filters 3NF-07...30 31
7.7 Mains filters 3EF-42...130 32
8 Brake resistors 33
8.1 General 33
8.2 Important notes 33
8.3 Type assignment and order codes 34
8.4 External brake resistor BAFP(U) 35
8.5 External brake resistor BAR(U) 36
8.6 External brake resistor BAS(U) 37
9 Capacitor Modules 38
9.1 General 38
9.2 Important notes 38
9.3 Type assignment and order codes 39
9.4 Example installation with AKD-P, KCM-P and KCM-E 39
9.5 KCM Module 40
10 Motor chokes 41
10.1 General 41
10.2 Important notes 42
10.3 Type assignment and order codes 42
10.4 Motor choke 3YL-24 43
10.5 Motor choke 3YLN-xx 44
11 Cables 45
11.1 Technical data for cables 45
11.2 Tools 45
11.3 PC connection 46
11.3.1 AKD 46
11.3.2 S300, S400, S600, S700 46
11.4 Power Voltage Supply, external brake resistor, DC bus link 48
11.4.1 Mating connector (part of delivery) 48
11.4.2 Mating connector (optional) 48
11.4.3 Recommended cable type 49
11.4.4 Preparing cables for AKD/S300/S400/S601...620/S700 49
11.4.5 Preparing cables for S640/670 and S748/772 51
11.5 24V auxiliary voltage supply 52
11.5.1 Mating connector (part of delivery) 52
11.5.2 Recommended cable type 52
11.5.3 Preparing cables 53
11.6 Digital/analog Inputs/Outputs 54
11.6.1 Digital In/Outputs for AKD-C 54
11.6.2 Digital In/Outputs for AKD-N 54
11.6.3 Digital/analog I/O for S300/S400/S600/S700 and AKD-B/P/T/M 55
11.6.4 Preparing cables 56
11.7 Encoder Emulation, Stepper motor control, Master-Slave 57
11.7.1 Mating connector, cable type 57
11.7.2 Connection 57
Accessories Europe | Table of Contents
4 Kollmorgen | December 2014
To Next Page
Loading...
Need help?
General
