Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued)
10-9
2. Touch IMAGE STORE/DELETE.
The Image Data Store/Delete Site Selection Screen will be displayed.
3. Touch HDD→ PC.
The Image Data Password Entry Screen will be displayed.
DETAILS
• The HDD→ PC key on the Image Data Store/Delete Site Selection
Screen initially indicates “MANUAL” to show that the manual setting on a
PC is required to complete the data transmission procedure.
Touch CHANGE DATA SEND SYSTEM to change “MANUAL” to
“AUTOMATIC” to complete it automatically. See p. 10-11 for detail.
•
The initial setting of the data transmission procedure indicated on the
HDD→ PC
key can be changed from “MANUAL” to “AUTOMATIC”.
Refer to the instruction of the setup application installed in a PC.
4. Enter your image data password from the touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each
character, then enter the correct job name.
10
Network
Function
Environment
Setup
HDD Job
Information
Job Status
Machine
Information
To Use Web
Utilities
Image Edit
Image Recall
Image
Store&Output
Image
Store/Delete
Server
Functions
To Next Page