KRONE ISOBUS-Terminal CCI 100
VI - 24
6.7.5 Menu 1-9 „Tying start delay"
CC000217
Fig.23
Displaying the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-9 by pressing function key or . The symbol is shown in
reverse colours
• Press function key
The display shows menu 1-9 “Tying start delay”.
Setting the tying start delay
The time delay is shown in seconds.
Note
Tying start delay indicates how much time there is between “Pressure /bale diameter reached” and
“Triggering the tying process” (in automatic mode).
• Set the desired time delay with the function key or , the symbol in the top line goes out
• Press function key
The symbol in the upper line indicates that the displayed value is saved.
• Pressing the function key closes the called up menu
• Pressing the function key and holding it down brings up the basic screen
To Next Page
Loading...
