Krone Comprima F 155 XC - 8.1.6.2 Adjusting the Automatic Blocking Time; 8.1.6.3 Adjusting the Engine Position (Net)

KRONE ISOBUS-Terminal CCI 100
VI - 20
6.7.2 Menu 1-4 “Sensitivity of the direction display”
CC000211
1-4
n
+
-
Fig.20
Setting the sensitivity of the direction display
Displaying the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-4 by pressing function key or . The symbol is shown in
reverse colours
• Press function key
The display shows menu 1-4 “Sensitivity of the direction display”.
The progress bar indicates the set sensitivity. The higher the bar, the greater the sensitivity of the
direction display. The symbol in the upper line indicates that the displayed value is saved.
Setting and saving the sensitivity of direction display (Comprima F125/F155).
The higher the sensitivity of the direction display is set, the stronger the motion indication in the form
of arrows (1) ( ).
• Set the sensitivity with the function key or , the symbol in the top line goes out
• Press the function key . The set sensitivity is saved and the symbol appears in the upper
line
• Pressing the function key closes the called up menu
• Pressing the function key and holding it down brings up the basic screen