Krone Comprima F 155 XC - Changing Cutters

V - 6
Basic Settings and Operation
5.3.5 Changing Cutters
The cutting system cutters are accessible from the bale
chamber.
• Open the rear flap.
Risk of accidents!
Secure the open rear flap against
unintentional shutting.
• Swivel the shut-off valve (1) of the left
lifting cylinder from position (a) to
position (b).
Before lowering the blade base, always
raise the pick-up.
Lower the cutter tray (1) mechanically or hydraulically.
b
a
1
1
a
1
1
b
CPK00230_3
F 125 / F 155
V 150 / V 180
1
RPN00013_2