Krone Comprima F 155 XC - 8.1.6.6 Approaching Tying Position

KRONE ISOBUS-Terminal CCI 100
VI - 22
6.7.3 Menu 1-5 „Pre-signalling"
CC000212
1-5
n
+
-
CC000213
CC000234
25
0
Displaying the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-5 by pressing function key or . The Symbol is shown in
reverse colours
• Press function key
The display shows menu 1-5 “Pre-signaling”.
The symbol in the upper line indicates that the displayed value is saved.
Setting pre-signaling:
Comprima F125/F155:
• The time advance is indicated in percentage
Comprima V150/V180:
• The time advance is indicated in cm
Note
Pre-signaling indicates how far in advance it is signalized that the bale has reached the “final
diameter (on Comprima V150/V180)” or the “bale density (on Comprima F125/F155)”.
• Set the desired time delay with the function key or , the symbol in the top line goes out
• Press the function key , the adjusted time delay is saved, the symbol in the upper line
appears
• Pressing the function key
closes the called up menu
• Pressing the function key and holding it down brings up the basic screen