Krone Comprima F 155 XC - Page 154

VIII - 22
KRONE operation terminal Beta
COM00014
M1
3
M1
M1
The display shows menu level 3 „Manual
operation“.
The following current states of the machine are shown
in the display (depending on how the machine is
equipped):
• = Tying position reached
• = Feed position reached
• = Cut-off position reached
• = Positions not defined
Move engine to feed position
Press the key for Softkey . The icon
appears in reverse colours and the engine moves out.
Moving the engine to the cut-off position
Press the key for Softkey . The icon
appears in reverse colours and the engine moves in.
Moving the engine to the tying position
Press the key for Softkey . The engine
first moves to the feed position and then back to the
tying position.
• You can use the
esc
6
key to close the menu
currently displayed.
The display shows menu level 3 „Manual operation“.
• Pressing the
esc
6
key twice brings up the basic
screen.