VIII - 24
KRONE operation terminal Beta
Diagnostics Namur sensors
State:
• Alive (iron)
• Not alive (no iron)
• Broken cable
• Short circuit
Setting values:
The minimum and maximum setting value with the
sensor alive (metal in front of the sensor) are shown in
the upper part of the bar display.
The current setting value (actual value) is displayed
under the bar display.
The distance from the sensor to the metal must be
adjusted so that the bar lies in the upper marked area
in the alive state.
Then check whether the bar is in the alive state in the
lower marked area.
Possible sensors (depending on how the machine
is equipped)
No. Sensor-icon Description
B1 Net length
B2 Net runs
B8 Ground adjustment
B5 Slip
B11 Bale chamber closed left
B12 Bale chamber closed right
RPK50500
B1
1
state
1
8,2V
7,4V
5,2V
2,8V
7,9V
4-2
To Next Page
Loading...
