III - 3
Before and After Use
3.2.3 PTO Shaft
• Push the PTO shaft (1) onto the tractor PTO shaft.
The safety mechanism must engage (see
the operating instructions provided by the
PTO shaft manufacturer).
• Secure the PTO shaft guard retaining chains (2).
3.2.2 Connecting the Hydraulic Hoses
(COMPRIMA V150; V 180)
Two single-action control units and free return are required
on the tractor to operate the machine.
Single-action control unit (1) (red1):
• Raise or lower tailgate
Single-action control unit (2) (red2):
The following functions of the control unit (2) depend on
the presetting on the control unit:
Single-action control unit (2) (yellow):
• Raise or lower pick-up or
• Raise or lower cutter tray
Action control unit (3) (blue3):
• free return
When connecting the hydraulic hoses,
make sure that the tractor and machine
hydraulics have been depressurized.
VP100002_1
1
2
3
4