KSR Moto TRIGGER 50 - GENERAL SPECIFICATION; ENGINE

ENGINE
Engine type: Liquid cooled 2 - stroke
Cylinder arrangement: Horizontal (+60°) single cylinder
Displacement: 49.6 cm³
Compression ratio: 7.0:1
Max. output (kw/rpm): 2.2 kW/ 6500 rpm
Max. torque (Nm/rpm): 3.6 Nm/ 5500 rpm
Starting system: Electric starter and Kick starter
Lubrication system: Fresh oil lubrication
ENGINE OIL QUANTITIY
Capacity: 1 L
Recommended type: CASTROL Power 1-Racing 2T Fully Synthetic
TRANSMISSION OIL
Quantity 0.5 L for disassemble/ 0.4 for replacement
Recommended type: CASTROL Power 1-Racing 4T 10W-40
AIR FILTER ELEMENT
Foam lter
FUEL
Recommended fuel: Unleaded gasoline only ≥ 95 Oct
Do not use Bio-Ethanol fuel - E10 is not permitted
Fuel tank capacity: 10 L ± 0.2 L
CARBURETTOR
Type/ Manufacturer: PZ19JB JB-4/ LEADER or QJ
Main jet: 95
Idle jet: 22.5
SPARK PLUG
Manufacturer/ model: NGK/BR8ES
CLUTCH
Clutch type: Multi-disc in oil bath
TRANSMISSION TYPE
Manual, 5 speed
CHASSIS
Frame type: Steel tube
TIRES (Version 0 = Trigger X)
Front tire
Type: Tubeless/ Pressure on cold tire: 2.25 bar
Size: Rim: 1.6*21
Tire: 3.00-21
Rear tire
Type: Tubeless/ Pressure on cold tire: 2.25-2.5 bar
Size: Rim: 1.85*18
Tire: 4.10-18
TIRES (Version 1 = Trigger SM)
Front tire
Type: Tubeless/ Pressure on cold tire: 2.25 bar
Size: Rim: 2.5*17
Tire: 100/80-17
Rear tire
Type: Tubeless/ Pressure on cold tire: 2.25-2.5 bar
Size: Rim: 3.00*17
Tire: 130/80-17
Version 0
Version 1
GENERAL SPECIFICATION
8