Operating Instructions
152 of 206
BA KR 6, 16 F, KR C4 12.10.07 en
10.9 Safety precautions when handling lubricants
The information contained in the safety data sheet according to 91/155 EEC must be ob-
served when handling lubricants. An excerpt from this data sheet is included in the robot sec-
tion ”Consumables, Safety Data Sheet”.
The following safety procedures must be observed at all times:
-- Avoid prolonged contact with the skin; wear protective gloves and aprons if neces-
sary (especially when working with cable grease).
Caution!
All accident prevention regulations must be observed when handling lubricants.
-- If lubricant is likely to come into contact with the skin, e.g. with the hands, suitable
barrier creams must be applied before work is started.
-- On completion of work and before smoking breaks or meal breaks (before any in-
take of food), clean oil--contaminated skin thoroughly with water and skin--friendly
cleansing agents or soap. After cleaning, replace lost skin grease with appropriate
skin creams containing grease.
-- Change oil--soaked clothing immediately. Do not carry oily rags or any cloths
soaked with solvents, mineral oil mixtures or cable grease in your pockets.
-- Avoid breathing in oil spray or vapors wherever possible.
To Next Page
Loading...
