Operating Instructions
46 of 206
BA KR 6, 16 F, KR C4 12.10.07 en
5.2.1 Liability
The device described in this document is either an industrial robot or a component thereof.
Components of the industrial robot:
G Manipulator
G Robot controller
G Teach pendant
G Connecting cables
G External axes (optional), e.g. linear unit, turn--tilt table, positioner
G Software
G Options, accessories
The industrial robot is built using state--of--the--art technology and in accordance with the rec-
ognized safety rules. Nevertheless, misuse of the industrial robot may constitute a risk to life
and limb or cause damage to the industrial robot and to other material property.
The industrial robot may only be used in perfect technical condition in accordance with its
intended use and only by safety--conscious persons who are fully aware of the risks involved
in its operation. Use of the industrial robot is subject to compliance with this document and
with the declaration of incorporation supplied together with the industrial robot. Any functional
disorders affecting the safety of the robot system must be rectified immediately.
Safety information
Safety information cannot be held against KUKA Roboter GmbH. Even if all safety instruc-
tions are followed, this is not a guarantee that the industrial robot will not cause personal inju-
ries or material damage.
No modifications may be carried out to the industrial robot without the authorization of KUKA
Roboter GmbH. Additional components (tools, software, etc.), not supplied by KUKA Ro-
boter GmbH, may be integrated into the industrial robot. The user is liable for any damage
these components may cause to the industrial robot or to other material property.
In addition to the Safety chapter, this document contains further safety instructions. These
must also be observed.
5.2.2 Intended use of the industrial robot
The industrial robot is intended exclusively for the use designated in the “Purpose” chapter
of the operating instructions or assembly instructions.
Information!
Further information is contained in the “Purpose” chapter of the operating instructions
or assembly instructions of the industrial robot.
Using the industrial robot for any other or additional purpose is considered impermissible
misuse. The manufacturer cannot be held liable for any damage resulting from such use. The
risk lies entirely with the user.
Operating the industrial robot and its options within the limits of its intended use also involves
observance of the operating and assembly instructions for the individual components, with
particular reference to the maintenance specifications.
To Next Page
Loading...
