Operating Instructions
204 of 206
BA KR 6, 16 F, KR C4 12.10.07 en
13.4 Safety data sheet for Microlube GL 261 lubricant
The following extract from the safety data sheet according to 91/155/EEC must be observed when han-
dling Microlube GL 261.
1 Designation of substance/formulation and manufacturer
T rade name: Microlube GL 261 Article no.: 020195
Use: Lubricant
Firm: KLÜBER LUBRICATION MÜNCHEN KG
Address: Geisenhausenerstr . 7, D--81379 Munich
Tel.: +49 89 7876 0
Fax: +49 89 7876 333
2 Composition / Information about the components
Chemical characterization:
-- Mineral oil
-- Lithium special soap
-- UV indicator
Hazardous components:
This product contains no substances requiring declaration as a hazardous
substance.
3 Possible hazards
This product is NOT classified as hazardous according to the German Dangerous Substances Order.
4 First aid measures
Eyes: Rinse thoroughly with plenty of water for several minutes; consult a doctor if
necessary.
Skin: W ash thoroughly with soap and water; replace lost skin grease with skin cream.
Inhalation: If oil vapor has been inhaled, ensure plentiful supply of fresh air and consult a
doctor if necessary.
Ingestion: Consult a doctor if symptoms persist.
5 Fire--fighting measures
Extinguishing agents
Suitable extinguishing agents:
Foam, fine water spray, dry powder, CO
2
.
Unsuitable extinguishing agents:
Full water jet.
Special fire--fighting measures:
Cool containers at risk from fire with water spray.
Residue from after a fire and contaminated fire--extinguishing water must be
disposed of in accordance with the applicable regulations.
In the event of fire, the following can be released:
Carbon monoxide (CO), hydrocarbons.
Special protective equipment:
Do not inhale gases from explosions and combustion.
Usual measures for fires involving chemicals.
To Next Page
Loading...
