EasyManua.ls Logo

Kuka KR 6-2 - Lubrication Work

Kuka KR 6-2
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 Maintenance work (continued)
131 of 206
BA KR 6, 16 F, KR C4 12.10.07 en
10.2 Lubrication work
Information!
Section 10.1 of this chapter must be observed!
Warning!
Turn the main switch on the robot control cabinet to “OFF” and secure it with a
padlock to prevent unauthorized persons from switching it on again.
Caution!
Utmost caution must be exercised when handling cable grease. The use of pro-
tective clothing (at least protective gloves, for example) is strongly recommen-
ded.
All accident prevention regulations and Chapter 5, “Safety” must be observed.
Notice!
Store used oil and grease in accordance with regulations and dispose of them
with minimum environmental impact.

Table of Contents

Related product manuals