EasyManua.ls Logo

Kuka KR 6-2 - 5.3 Personnel

Kuka KR 6-2
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Safety (continued)
49 of 206
BA KR 6, 16 F, KR C4 12.10.07 en
5.3 Personnel
The following persons or groups of persons are defined for the industrial robot:
G User
G Personnel
Notice!
All persons working with the industrial robot must have read and understood
the industrial robot documentation, including the safety chapter.
User
The user must observe the labor laws and regulations.
This includes e.g.:
G The user must comply with his monitoring obligations.
G The user must carry out instructions at defined intervals.
Personnel
Personnel must be instructed, before any work is commenced, in the type of work involved
and what exactly it entails as well as any hazards which may exist. Instruction must be carried
out regularly. Instruction is also required after particular incidents or technical modifications.
Personnel includes:
G System integrator
G Operators, subdivided into:
-- Start--up, maintenance and service personnel
-- Operating personnel
-- Cleaning personnel
Notice!
Installation, exchange, adjustment, operation, maintenance and repair must be
performed only as specified in the operating or assembly instructions for the
relevant component of the industrial robot and only by personnel specially
trained for this purpose.
System integrator
The industrial robot is safely integrated into a complete system by the system integrator.
The system integrator is responsible for the following tasks:
G Installing the industrial robot
G Connecting the industrial robot
G Performing risk assessment
G Implementing the required safety functions and safeguards
G Issuing the declaration of conformity
G Attaching the CE mark
G Creating the operating instructions for the complete system

Table of Contents

Related product manuals