2NM/2NX/2NY/2NZ/2P0/2P6-1
1-3-54
U411 Auto Adj Scn
Description
Uses a specified original and automatically adjusts the following items in the scanner and the DP
scanning sections.
Scanner section: Original size magnification, leading edge timing, center line, input gamma, input
gamma in monochrome mode and matrix.
DP scanning section: Original size magnification, leading edge timing, center line.
Purpose
To perform automatic adjustment of various items in the scanner and the DP scanning sections.
Method
1. Press the start key.
2. Select the item. The screen for executing is displayed.
Display Description
Original to be used for adjustment
(P/N)
(No Action) *1 - -
Table Automatic adjustment in the scanner sec-
tion.
Original size magnification, leading edge
timing, center line, input gamma, input
gamma in monochrome mode and matrix.
302NM94340
DP Automatic adjustment in the DP scanning
section.
Original size magnification, leading edge
timing, center line.
302NM94330
All Performs automatic adjustment in the DP
scanning section following automatic
adjustment in the scanner section.
302NM94340
302NM94330
Target Set-up for obtaining the target value 302NM94340
302NM94330
*1: Basic model only
To Next Page
Loading...
Need help?
General
