Kyocera ECOSYS M3540dn Service Manual

2NM/2NX/2NY/2NZ/2P0/2P6-1
1-3-38
U201 Init Touch Panel (HyPAS only)
Description
Adjust touch panel detecting positions.
Purpose
When the panel PWB or the operation panel is replaced or if the detecting positions are not
aligned, perform this simulation to correct and confirm.
Method
1. Press the start key.
2. Select [Initialize] or [Check].
Display Description
Initialize Executes the correction of the touch panel display position.
Check Confirms the display position of touch panel.
Method: [Initialize]
1. Press the center of the + keys. Be sure to press three + keys displayed in order.
The touch panel is adjusted automatically.
2. Press the indicated three + keys, and then check the display.
* : After complete setting, move to the [Check] screen automatically.
Method: [Check]
1. Press the indicated three + keys, and then check the display.
When adjusting the display, press [Initialize] to execute the adjustment automatically.
2. Press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Kyocera ECOSYS M3540dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Type	Color CIS
Scan Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Paper Capacity	500 sheets
Connectivity	USB, Ethernet
Copying	Yes
Scanning	Yes
Modem Speed	33.6 kbps
Standard Input Capacity	500 sheets
Standard Output Capacity	250 sheets
Maximum Output Capacity	250 sheets
Maximum Print Size	A4
Standard Interfaces	USB 2.0, Ethernet
Ethernet LAN	Yes
Internal Memory	512 MB
Power Consumption (typical)	661 W
Display	LCD
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm (pages per minute)
Copy Speed	40 cpm (copies per minute)
Standard Paper Tray Media Types	Recycled
Maximum Internal Memory	1, 536 MB
Weight	22 kg
Product Colour	Black