EasyManuals Logo

Kyocera ECOSYS M3540dn Service Manual

Kyocera ECOSYS M3540dn
483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
2NM/2NX/2NY/2NZ/2P0/2P6
1-3-31
U068 DP Scn Start Pos
Description
Adjusts the position for scanning originals from the DP. Performs the test copy at the four scanning
positions after adjusting.
Purpose
Used when the image fogging occurs because the scanning position is not proper when the DP is
used. Run U071 to adjust the timing of DP leading edge when the scanning position is changed.
Method
1. Press the start key.
2. Select the item to be adjust.
Display Description
Setting
range
Initial
setting
Change in
value per step
DP Read Starting position adjustment for scan-
ning originals.
-38 to 38 0 0.158 mm
Black Line Scanning position for the test copy orig-
inals.
0 to 3 0 -
Adjustment: DP Read
1. Select [DP Read].
2. Change the setting using the cursor right/left keys or numeric keys.
When the setting value is increased, the scanning position moves to the right and it moves to
the left when the setting value is decreased.
3. Press the start key. The value is set.
Adjustment: Black line
1. Select [Black Line].
2. Change the setting using the cursor right/left keys or numeric keys.
3. Press the start key. The value is set.
4. Set the original (the one which density is known) in the DP and press the system menu key.
5. Press the start key. Test copy is executed.
6. Perform the test copy at each scanning position with the setting value from 0 to 3 and check
that no black line appears and the image is normally scanned.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Table of Contents

Other manuals for Kyocera ECOSYS M3540dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M3540dn and is the answer not in the manual?

Kyocera ECOSYS M3540dn Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Scan TypeColor CIS
Scan Resolution600 x 600 dpi
Fax CapabilityYes
Fax Transmission Speed33.6 kbps
Paper Capacity500 sheets
ConnectivityUSB, Ethernet
CopyingYes
ScanningYes
Modem Speed33.6 kbps
Standard Input Capacity500 sheets
Standard Output Capacity250 sheets
Maximum Output Capacity250 sheets
Maximum Print SizeA4
Standard InterfacesUSB 2.0, Ethernet
Ethernet LANYes
Internal Memory512 MB
Power Consumption (typical)661 W
DisplayLCD
FunctionsPrint, Copy, Scan, Fax
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed40 ppm (pages per minute)
Copy Speed40 cpm (copies per minute)
Standard Paper Tray Media TypesRecycled
Maximum Internal Memory1, 536 MB
Weight22 kg
Product ColourBlack

Related product manuals