EasyManuals Logo

Kyocera ECOSYS M3540dn Service Manual

Kyocera ECOSYS M3540dn
483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
2NM/2NX/2NY/2NZ/2P0/2P6-1
1-3-63
U600 Init All Data
Description
Initializes software switches and all data in the backup data on the FAX control board, according to
the destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes
the file system, communication past record and register setting contents.
Purpose
To initialize the FAX control board.
Method
1. Press the start key.
The screen for entering the destination code and OEM code is displayed.
2. Select [Country Code] and enter a destination code using the numeric keys (refer to the desti-
nation code list on following for the destination code).
Display Destination
Country Code Country code.
OEM Code OEM code.
Execute Data initialization starts.
* : OEM code is no operation necessary.
3. Select [Excute] and press the start key.
Data initialization starts. To cancel data initialization, press the stop key.
4. After data initialization, the entered destination, OEM codes and ROM version are displayed. A
ROM version displays three kinds, application, boot, and IPL.
* : When initialization is successful, "Completed" during 1 second is displayed.
* : Where an irregular value is inputted, when it initializes, the following error displays are per-
formed.
Kind of error
Unknown Country (When Country Code is unknown)
Unknown OEM (When OEM Code is unknown)
Unknown Country (When both are unknown)
Destination code list
Code Destination Code Destination
007 Argentina 115 Mexico
009 Australia 126 New Zealand
022 Brazil 136 Peru
038 China 137 Philippines
080 Hong Kong 152 Middle East
084 Indonesia 156 Singapore
088 Israel 159 South Africa
097 Korea 169 Thailand
108 Malaysia 181 U.S.A.

Table of Contents

Other manuals for Kyocera ECOSYS M3540dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M3540dn and is the answer not in the manual?

Kyocera ECOSYS M3540dn Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Scan TypeColor CIS
Scan Resolution600 x 600 dpi
Fax CapabilityYes
Fax Transmission Speed33.6 kbps
Paper Capacity500 sheets
ConnectivityUSB, Ethernet
CopyingYes
ScanningYes
Modem Speed33.6 kbps
Standard Input Capacity500 sheets
Standard Output Capacity250 sheets
Maximum Output Capacity250 sheets
Maximum Print SizeA4
Standard InterfacesUSB 2.0, Ethernet
Ethernet LANYes
Internal Memory512 MB
Power Consumption (typical)661 W
DisplayLCD
FunctionsPrint, Copy, Scan, Fax
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed40 ppm (pages per minute)
Copy Speed40 cpm (copies per minute)
Standard Paper Tray Media TypesRecycled
Maximum Internal Memory1, 536 MB
Weight22 kg
Product ColourBlack

Related product manuals