2NM/2NX/2NY/2NZ/2P0/2P6
1-3-42
U250 Mnt Cnt Pre-set
Description
Changes preset values for maintenance cycle.
Purpose
Provides changing the time when the message to acknowledge to conduct maintenance adjust-
ment is periodically displayed.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +- keys or numeric keys.
Display Description Setting range
M.Cnt A Preset values for maintenance cycle A. 0 to 9999999
Clear A value is cleared. 0
4. Press the start key. The value is set.
Clearing
1. Select [Clear].
2. Press the start key. The setting value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
Need help?
General
