2G6
1-4-4
Service items Description
Total page
Toner install mode
Parallel I/O information
Serial I/O error code
USB information
Operator panel lock status
(displayed only when locked)
NVRAM error
(displayed only when any error has oc-
curred)
Printable area setting
Left offset for each paper source
Top offset for each paper source
Offset for page rotation
Serial interface information
(displayed only when serial interface
board IB-11 installed)
Operator panel message language
Number of rebooting for vertical distor-
tion check
Fixed asset number
Media type attributes
Media type attributes
Memory SPD information (slot 1)
Engine parameter setting
Machine serial number
Total print page count
-
-
00: Normal
Bit 0: Framing error
Bit 1: Overrun error
Bit 2: Parity error
00: Not connected
01: Full-Speed
02: Hi-Speed
01: Partial lock
02: Full lock
01: ID error
02: Version error
03: Checksum error
04: NVRAM crash error
/Top offset/Left offset/Page length/Page width
/MP tray/Cassette/Option paper feeder/(non support)
/MP tray/Option paper feeder/(non support)
/Top offset/Left offset/
RS2: RS-232C
RS4: RS-422A
PMSG command setting (decimal)
-
(maximum 16 characters)
Media type setting value from 1 to 28 (fuser temperature,
paper thickness, duplex printing)
(unused media type always 0x00.)
Media type setting value from 1 to 28 (print density)
(unused media type always 0x00.)
32 bytes (2 to 6 bytes, 8 to 36 bytes and 94 to 95 bytes)
Hexadecimal, 128 bytes (256 digits)
-
No. Item Description
To Next Page
Loading...
