Kyocera FS-1030D - Connecting and Printing Setup

2G6
1-4-3
Service items Description
No. Item Description



Engine ROM information
Boot ROM information
Software jumper switch information
(hexadecimal)
[Flash ROM version]
[Boot ROM version and flash DIMM version]
[First byte/second byte (displayed in OEM mode only)]
First byte
Bit 0 = 1: (Fixed)
Bit 1 = 0: Overseas, 1: Domestic (Japan)
Bit 2, 3 (Not used)
Bit 4 = 0: Kyocera, 1: OEM
Bit 5 = 0: For Europe, 1: For US
Bit 6 = 0: Non MICR mode, 1: MICR mode
Bit 7 (Not used)
Second byte: Displayed in OEM mode only
Figure 1-4-2 Service information
Details of service information
Service information
 
    
 
  






 

[EB20MA001/2G6_1000.001.010][22.00A][03/03] Total page 9690
/t/P00/S00/U00/F00/N00/
/0020/0020/1061/0811/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/
/RS2/1/1
A:1234567890123456
/03030303/03030303/03030303/03000000/00000000/03030303/03030303/
/03030303/03030303/03030303/03000000/00000000/03030303/03030303/
SPD1:0203040508090A0B0C0D0F101112131415161718191A1B1C1D1E1F202122235E
/8088808880808000/8088808880808000/8088808880808000/8088808880808000
/8088808880808000/8088808880808000/8088808880808000/8088808880808000
/8088808880808000/8088808880808000/8088808880808000/8088808880808000
/8088808880808000/8088808880808000/8088808880808000/8088808880808000
SN:SPL9200010