Why are my Kyocera All in One Printer copies too dark?
If copies from your Kyocera All in One Printer are too dark: * Set the correct density for auto density if Auto Density is set. * Use the density adjustment key to set the correct density if Manual Density is set.
What to do if Kyocera KM-2540 All in One Printer doesn't produce copies?
If your Kyocera All in One Printer doesn't produce copies when pressing the Start key, check the touch panel for a message and take action accordingly.
How to add paper in the Multi Purpose Tray of Kyocera KM-2540?
If your Kyocera All in One Printer displays 'Add paper in the Multi Purpose Tray', load paper of the size indicated in the MP tray.
Why is my Kyocera KM-2540 not printing anything?
If nothing is printing out from your Kyocera All in One Printer, first check if the power cord is securely connected to a power source. Also ensure that the printer is turned on using the main switch. Verify that you are using a compliant printer cable and that it's properly connected. Make sure to connect the printer cable before turning the printer on. If the Status indicator is flashing amber, press the [Print] key to switch to the printer mode, then press [GO] to put the printer online and make the Status indicator go out.
What to do if Kyocera All in One Printer says 'Close Document Processor'?
If your Kyocera All in One Printer displays 'Close Document Processor', close the document processor while loading the original.
Why are my Kyocera KM-2540 copies too light?
If copies from your Kyocera All in One Printer are too light, try these solutions: * Set the correct density for auto density if Auto Density is set. * Use the density adjustment key to set the correct density if Manual Density is set. * Shake the toner container up and down approximately 10 times to distribute the toner evenly. * Set EcoPrint to Off. * Replace the toner container if there is a message indicating the addition of toner. * Replace the paper with new paper if the paper is damp.
How to set cassette in Kyocera KM-2540?
If your Kyocera All in One Printer displays 'Set cassette #. (Close paper cassette #.)', pull out the indicated cassette and push it in securely.
Why does my Kyocera All in One Printer say 'Check the cover'?
If your Kyocera All in One Printer displays 'Check the cover', close all covers securely, paying attention to any message indicating which cover is open.
What to do if Kyocera All in One Printer says 'Close ### cover'?
If your Kyocera All in One Printer displays 'Close ### cover', ensure that all covers are securely closed.
How to set the toner container in Kyocera KM-2540?
If your Kyocera All in One Printer displays 'Set the toner container', open the front cover and pull the toner container out. Shake the container well and set it back in place to ensure it is securely installed.
General| Type | All-in-One Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Print Speed (Black) | 25 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed (Black) | 25 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scanner Type | Flatbed |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Fax Modem Speed | 33.6 Kbps |
| Max Scan Size | 8.5 x 14 inches |
| Connectivity | USB |
| Operating System Compatibility | Windows, Mac |
Identifies and describes the main physical components of the fax machine and its document processor.
Explains the various capabilities and operational features available on the fax machine.
Explains the standard procedures for transmitting documents via fax.
Details how to configure the fax for automatic reception of incoming documents.
Details the process for transmitting both sides of duplex documents.
Guides users on how to interpret and resolve error messages displayed on the machine.
Offers a reference guide to common problems and their corrective procedures.
Explains how to view the status of recent fax transmissions and receptions.
To Next Page
