71
6 Operating Control and Displays
DATA PROCESSING
Use DATA PROCESSING to:
• Read out datasets from the BT300
• To transfer datasets to the BT300
6.1.3 Main Menu
For a complete description of the display symbols, see chapter 11.1 Display Symbols
NOTICE
The parameters of release level 1 must be protected against unauthorised modification by pro-
gramming a password. This password must not be the same as the factory setting
6.1.4 Information Menu Path
Fig. 6-2 Main menu
1 INFORMATION menu path [selected]
2 Display of fuel type
3 Bar graph of internal firing rate in %
(0 - 100)
4 MANUAL menu path
5 SETTINGS menu path
6 Release level
7 DATA HANDLING menu path
1
8 Window number
1 Excess level 1 is mandatory
Burner information Error history
Softwareversion
Checksums
Serial number Continuous output configuration
(display only)
Digital
inputs/outputs
To Next Page
Loading...
