89
6 Operating Control and Displays
6.1.7.7 User Interface Settings
How to set the UI300’s display
Adjust brightness.
Adjust contrast
Set waiting time for screen saver
NOTICE
The screen saver may not be set to 0!
Additional value setting via buttons in the main window
Brightness and contrast can be changed via the cursor keys in the main window as follows:
Contrast + Key 1 + 2
Contrast - Key 3 + 4
Brightness + Key 1+ 4
Brightness - Key 2 + 3 The specified keys must be pressed simultaneously.
To Next Page
Loading...
