75
6 Operating Control and Displays
6.1.4.4 Display of Check Sums
Displaying Check Sums
0 ... 4 = Check sum, access levels 0 ... 4
The checksums are generated from the device parameters. The BT300 calculates one
checksum for the parameters of each access level (0, 1, 2 or 4). The UI300 indicates the
checksums in hexadecimal code.
The checksum shows whether the value of one or more parameters have been changed.
6.1.4.5 Serial Number
UI = Serial numberUI300
BT = Serial number BT300
6.1.4.6 Positions of Actuators
Indication of the channel’s actual (left to right):
Channel 1 (oil)
Channel 2 (air)
Channel 3 (oil)
Optional channel (OFF; control of the frequency inverter)
NOTICE
The assignment of channels is depending on configuration settings!
To Next Page
Loading...
