LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
56 LNC Technology Co., Ltd.
【Function Keys at Right of Screen】
※ Confirm：pressing 【NEW】 or 【DEL】 key at screen bottom for the confirm key to occur. Pressing 【NEW】
key at the screen bottom. Then pressing【OK】to open the new file and to switch the screen to the
main function screen. Pressing 【OK】after pressing 【DEL】key at the screen bottom, the project
where the yellow cursor occurs will be deleted.
※ Cancel：pressing 【OPEN】 or 【DEL】 key at the screen bottom first. Then, pressing【DEL】 key after
pressing 【OPEN】 key at screen bottom to cancel opening new file. Pressing 【CANCEL】 key
after pressing 【DEL】 key at screen bottom to cancel deleting file.
◎ Screen of Working Method is as below:
Figure 1.6-3 Working Method Page

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English