ProtoMat S Product description
© 2011 LPKF AG HB V0.9/Mrz-11 11
1
1.3.1 Accessories
The following components can be delivered as accessories:
Tab. 2:
Accessories
Quantity Description
1 Tool set 1/8“
1 HF tool set 1/8“
1 Dust extraction with auto switch feature
1 Vacuum table to fix work pieces
1 Vision System for detection of fiducials
1 Measuring microscope to check milling tracks and drillings
1 Status Light
1.3.2 Provided components of the operator
The following components are not included in the delivery and have to be
provided by the operator.
1.3.2.1 Control computer
A control computer with the following characteristics has to be supplied by the
operator:
Tab. 3: PC data
Component Rating
CPU IBM compatible from Intel Pentium IV or higher
(comparable to Dual Core 2 GHz)
RAM At least 1 GB DDR2 RAM
Hard disk 2 GB free space on internal disk
Graphic board NVIDEA with at least 512 MB graphics memory
Screen resolution 1280 x 1024 / High Colour (16 Bit)
Monitor 17“ VGA colour monitor
To Next Page
Loading...
