LPKF ProtoMat S63 - Safety Notes; Device Safety

ProtoMat S Safety notes
© 2011 LPKF AG HB V0.9/Mrz-11 21
2
Pos: 6 /ED_Technische_D okumentation/2_Bedi enungsanleitung/ Maschine/RP_Fr äsbohrplotter/Pr otoMat_S_Serie/Pr otoMat_S_Serie_IIG/ Kapitel_2_Sicher heitshinweise/2_1 _Gerätesicherhei t @ 0\mod_1254406707494 _2058.docx @ 3552 @ 12
2 Safety notes
The following chapter lists the most important safety notes for working with the
machine and the corresponding control software.
2.1 Device safety
WARNING
Danger to life due to electrical shock!
Missing or inadequate electrical grounding may cause deadly
current strokes and/or fire.
The machine must operate connected with a tested protective
earth contact socket and the correct earthing must be checked.
WARNING
Danger to life due to electrical shock!
Missing or inadequate electrical fuse protection may cause
deadly current strokes and/or fire.
Never bypass any fuses! Use only the fuses recommended by
the manufacturer.
ATTENTION
Health hazard!
During machining of work parts harmful fine particles and gases
may develop that can be inhaled!
Make sure that dust extraction is activated during machining of
the work piece. Use fine particle filters exclusively.
ATTENTION
Risk of injury!
The machine is heavy and bulky, thus it cannot be carried, be
lifted or transported by only one person!
Lift and transport the machine always with two persons.
ATTENTION
Risk of injury!
Any accidental starting of the motor and moving of the mill/drill
head during repairs and servicing may cause considerable
injuries.
Make sure that only one person operates the machine. Secure
the machine during servicing and repair activities appropriate.