LPKF ProtoMat S63 - Emissions; Acoustic Emission; Material Emission; Protection of Persons

ProtoMat S Functional description
© 2011 LPKF AG HB V0.9/Mrz-11 37
3
Pos: 12 /ED_Technisc he_Dokumentation/2_Be dienungsanleitun g/Maschine/RP_Fräsb ohrplotter/Pr otoMat_S_Serie/Pr otoMat_S_Serie_II G/Kapitel_3_Funktion sbeschreibung/ 3_5_Emissionen @ 0\mod_ 1254743222209_2058.doc x @ 3616 @ 233
3.5 Emissions
3.5.1 Acoustic emission
The permanent acoustic noise and vibration values of the circuit board plotter
do not exceed the legal compulsory acoustic exposition level of 85 dB (A).
Max. noise level
(without soundproof hood and dust
extraction)
71 dB (A)
The noise level depends on the processing material. At a permanent heavy
noise level the operator has to wear an ear protection (one way ear protection
or circumaural headphones).
3.5.2 Material emission
During machining of circuit boards or materials dust or fine particles occur.
These fine particles are, depending on the material, more or less hazardous to
health and must not be expired to the environment. Thus a dust extraction has
to be activated during operation of the circuit board plotter that extracts fine
particles in a fine particle filter.
Pos: 13 /ED_Technisc he_Dokumentation/2_Be dienungsanleitun g/Maschine/RP_Fräsb ohrplotter/Pr otoMat_S_Serie/Pr otoMat_S_Serie_II G/Kapitel_3_Funktion sbeschreibung/ 3_6_Schutz_von_Perso nen @ 0\mod_1254744675624 _2058.docx @ 3620 @ 2
3.6 Protection of persons
Any effective legal and internal work protection measures have to be obeyed.
According to the application and the material to be processed the operator has
to wear appropriate protective clothing, this includes:
● Safety glasses
● Safety gloves
● Ear protection (one-way ear protection or earmuffs)
● Respirator mask
The safety instruction in chapter 2 (see Page 21) have to be obeyed in any
case.
Pos: 14 /ED_Technisc he_Dokumentation/2_Be dienungsanleitun g/Maschine/RP_Fräsb ohrplotter/Pr otoMat_S_Serie/Pr otoMat_S_Serie_II G/Kapitel_3_Funktion sbeschreibung/ 3_7_Entsorgung_des_Abf allmaterials @ 0\m od_1254745255574_20 58.docx @ 3624 @ 2
3.7 Disposal of waste material
Local laws, directions and regulations as well as company directions concerning
waste of material (fine particles and rest materials) have to be obeyed.
Check disposal with the responsible employee of your company e.g. your
environmental protection representative.