LPKF ProtoMat S63 - 10 Appendix; Tools and Consumables; Tools

ProtoMat S Appendix
© 2011 LPKF AG HB V0.9/Mrz-11 93
10
Pos: 35 /ED_Technisc he_Dokumentation/2_Be dienungsanleitun g/Maschine/RP_Fräsb ohrplotter/Pr otoMat_S_Serie/Pr otoMat_S_Serie_II G/Kapitel_10_Anhang/ 10_1_Werkzeug und Ver brauchsmaterial @ 0\ mod_1254755787395_2058. docx @ 3647 @ 12344344
10 Appendix
10.1 Tools and consumables
10.1.1 Tools
Any tool for the circuit board plotter can be ordered individually:
Tab. 16: Tools
Tool specification Length
(mm)
Ø
(mm)
Order
code.
End Mill RF, special tool, cylindrical, 1/8“ 36 0,15 115 832
End Mill RF, special tool, cylindrical, 1/8“ 36 0,25 115 833
End Mill RF, special tool, cylindrical, 1/8“ 36 0,40 115 834
Universal Cutter, conical, 1/8“ 36 0,2/0,5 115 835
Micro Cutter, Fine Line, conical, 1/8“ 36 0,1/0,15 115 836
End Mill long, cylindrical, PCB/aluminium 1/8“ 38 1,00 115 837
End Mill long, cylindrical, PCB/aluminium 1/8“ 38 2,00 115 838
End Mill, cylindrical, PCB/aluminium, 1/8“ 36 0,80 115 839
End Mill, cylindrical, PCB/aluminium, 1/8“ 36 1,00 115 840
End Mill, cylindrical, PCB/aluminium, 1/8“ 36 2,00 115 841
End Mill, cylindrical, PCB/aluminium, 1/8“ 36 3,00 115 842
Contour Router, special tool, cylindrical, 1/8“ 38 1,00 115 844
Contour Router, special tool, cylindrical, 1/8“ 38 2,00 115 845
Spiral Drill, cylindrical, 1/8“ 38 0,20 115 846
Spiral Drill, cylindrical, 1/8“ 38 0,30 115 847
Spiral Drill, cylindrical, 1/8“ 38 0,40 115 848
Spiral Drill, cylindrical, 1/8“ 38 0,50 115 849
Spiral Drill, cylindrical, 1/8“ 38 0,60 115 850
Spiral Drill, cylindrical, 1/8“ 38 0,70 115 851
Spiral Drill, cylindrical, 1/8“ 38 0,80 115 852
Spiral Drill, cylindrical, 1/8“ 38 0,85 115 853
Spiral Drill, cylindrical, 1/8“ 38 0,90 115 854
Spiral Drill, cylindrical, 1/8“ 38 1,00 115 855
Spiral Drill, cylindrical, 1/8“ 38 1,10 115 856
Spiral Drill, cylindrical, 1/8“ 38 1,20 115 857
Spiral Drill, cylindrical h, 1/8“ 38 1,30 115 858
Spiral Drill, cylindrical, 1/8“ 38 1,40 115 859