UM-1151140EN, Rev. C, May 2016
Laser
Safety
and
Regulatory
2.6. Electrical Hazards
Because the Smart532 contains high-voltage components, there is a danger
of severe shock if its covers are taken off by other than trained personnel.
To guarantee both operator and patient safety, operator service is limited to
the items described in the Maintenance chapter of this manual. Other
service must be performed only by Lumenis trained personnel.
• Never open the laser console protective covers. Opening the
covers will expose personnel to high voltage components, the
laser resonator and possible laser radiation. Only Lumenis-
certified service technicians are qualified to service the system
.
• To avoid electrical shock, the area around the laser and
footswitch should be kept dry. Do not operate the laser if any of
the cables are faulty or frayed. The laser should undergo
routine inspection and maintenance per Lumenis'
recommendations and institutional standards
.
To Next Page
Loading...
