LUMENIS smart532 - Table 6-2: Troubleshooting Guide: Error Messages Requiring Contact with Lumenis Service

UM-1151140EN, Rev. C, May 2016
6-7
Smart532
™
Maintenance and Troubleshooting
Table 6-2: Troubleshooting Guide: Error Messages Requiring Contact with Lumenis Service
#
Error Message Text
1 Software Version Error
2 Internal Communication Error (G-C)
3 Internal Communication Error (C-F)
5 Aiming Beam Not Calibrated
6 Aiming Beam Error
7 Display Press-Buttons Error
9 Temperature Error (LBO)
10 Temperature Range Error (LBO)
12 Temperature Error (Diode)
13 Temperature Range Error (Diode)
20 Internal Clock Error
26 Shutter Error
27 Diode Error (Current)
28 Diode Error (Check)
29 Diode Error (Power)
31 Timing Error
36 Voltage Error (12V)
37 Voltage Error (3.3V)
38 Voltage Error (1.9V)
40 Port Selection Error
41 Power Calibration Error
48 Parameters Error
49 Diode Temperature Error
50 Diode Temperature Error
51 Diode (LBO) Temperature Error