LUMENIS smart532 - Chapter 6 Maintenance and Troubleshooting; 6.1. User Maintenance; 6.1.1. Annual Laser Maintenance; 6.1.2. Laser System Repair

UM-1151140EN, Rev. C, May 2016
6-1
Chapter 6
Maintenance and Troubleshooting
6.1. User
Maintenance
6.1.1. Annual Laser
Maintenance
6.1.2. Laser System
Repair
6.1.3. Clean the
External Surfaces
of the Laser
Console
6.1.4. Clean the LCD
Panel
Preventative maintenance, safety, power and calibration tests should be
performed annually by a Lumenis-certified service engineer to ensure
proper laser performance.
All laser system repairs should be performed by a Lumenis-certified
service engineer. For detailed information contact your Lumenis
representative.
Use a cloth dampened with a hospital-grade disinfectant to wipe the
external surfaces of the laser console. Dry with a clean cloth or allow to air
dry.
The LCD panel should be cleaned with a dedicated LCD cleaning liquid,
available in most office supply stores.
Do not spray or pour cleaning agents directly on the laser console
or LCD panel. You may damage the console, screen, and laser
system electronics.
Caution