UM-1151140EN, Rev. C, May 2016
Laser
Safety
and
Regulatory
2.11. Warning,
Certification and
Identification
Labels
Figure 2-2 displays the labels affixed to the system:
1.
Identification and Certification – the label contains the following
information:
● System's model name and part number.
● Serial number and date of manufacture.
● Manufacturing series number of the system.
● The system's electrical requirements.
● CSA compliance symbol.
● CE marking.
● – Follow instructions for use.
● Rx Only – Caution: Federal law restricts this device to sale
by or on the order of a physician.
● WEEE symbol – directs that the electrical/electronic product be
disposed of in an environmentally safe way as the directive sets
collection, recycling and recovery targets for all types of electrical
goods.
● Details of the manufacturer and of the
authorized
representative in the European Community.
2.
Laser Emission Danger – the label contains the following
information:
● Warns against possible exposure to laser beam radiation and
specifies the type and classification of laser beams present.
● System's electrical requirements.
3.
Laser Aperture – indicates laser beam exit port, located
next to the fiber connection ports on the front and rear
panels of the system.
4.
Type B/BF Equipment – type BF relates only to the
probe.
5.
Standard & Smart Footswitches IP Rating – the watertight level of
these footswitches conform to the IP68 standard
6.
PowerEase Footswitch IP Rating – the watertight level
of this footswitch conforms to the IP28 standard.
7.
Emergency Stop Switch – pressing this switch immediately disables
laser energy emission. Turn the switch 1/4 turn clockwise to reset it.
8.
Upper Window Port Labels – displays the labels describing the
connection ports in the upper window of the rear panel, including
electrical specifications.
9.
Lower Window Port Labels – displays the labels describing the
connection ports in the lower window of the rear panel.
To Next Page
Loading...
