LUMENIS smart532 - 3.1.6. Touch-Screen LCD Control Panel; 3.1.7. Optical Bench Assembly

3-6
UM-1151140EN, Rev. C, May 2016
Smart532
™
System Description
3.1.6. Touch-Screen
LCD Control
Panel
3.1.7. Optical Bench
Assembly
The Smart532 system is controlled by pressing the buttons on the touch-
screen. Figure 3-4 presents a sample control screen; all aspects of the
operating system will be discussed in the Operating Instructions chapter
later in this manual.
Figure 3-4: Touch-Screen LCD Control Panel
The optical bench assembly is comprised of the optical resonator that
generates the 532-nm green laser beam, the laser shutter assembly, the
photodiodes, the aiming beam assembly and the beam combiner.
The aiming beam is a low-powered 635 nm diode laser with an adjustable
intensity control.
The beam combiner combines the 532-nm green laser and the aiming
beam coaxially, and guides them into the laser output aperture.