Mackie DL806 and DL1608 Reference Guide
136
Anopengrayboxwithonlythemasterfader’snameworks,butlet’sspiceitupwithanimage.
Show images are kept in sync which means that all connected devices will display the new
image once its been added, whether or not it was already on that device. There are several
waystochooseanimage.Fromthepopover,tap“Image”torevealanewpopoverasseen
totheleft[ImageSource].Youwillbepresentedwithvechoices:
Camera — Ifyou’refamiliarwithhowthecameraontheiPhoneoriPodtouchworks,then
you’reinluck...thisoneworkstheexactsameway!Theencircledcameraiconsnapsthepicture
and the icon in the upper-right corner selects between the front and back camera on the
iPhoneoriPodtouch.
Photo Library — HereyoumayselectfromallthephotosthatcurrentlyresideonyouriPhone
oriPodtouch.
Icon — Or select from a multitude of built-in icons at your disposal.
Show Images — This allows you to select the master fader image from photos that
are currently in use on the current show. The list will display all images currently in use.
Tap the photo you would like to use from this list.
Amaximumof64imagesmaybeusedpershow.However,Ifthesameimageisused
on multiple channels, it only counts as one image (if the image has been selected from show
images and not multiple times from the photo library). Icons do not count toward the 64.
Moreinformationaboutthelesystem[shows,snapshots,etc.]beginsonpage102.
Clear Image — Believe it or not, tapping here will clear the image for that channel.
SincewealreadynamedthemasterfaderthePA,wemightaswellgowiththePAicontoboot,
right?TapthePAiconinthelower-leftcorner.Themasterfaderisset:nameandimage.
Icon
Photo Library
Camera
Image Source