Maeda CC1485S-1 - Page 85

77
[3] LAMP SWITCH
Use this switch to turn on the working lamp and headlamps.
• (a) ON position: The lamp turns on.
• (b) OFF position: The lamp turns off.
[4] FRONT WINDOW WIPER SWITCH
Use this switch to activate the wiper of the cab front window
and window washer fluid.
• (a) Wiper position: The wiper operates.
• (b) Washer position:
When the switch continues to be pressed, washer
fluid is emitted and the wiper operates.
When you release your hand from the switch, the
switch returns, washer fluid stops and the wiper also
stops.
• (c) Stop position: The wiper stops.
[5] ROOF WINDOW WIPER SWITCH
Use this switch to activate the wiper of the cab roof. window
and window washer fluid.
• (a) Wiper position: The wiper operates.
• (b) Washer position:
When the switch continues to be pressed, washer
fluid is emitted and the wiper operates.
When you release your hand from the switch, the
switch returns, washer fluid stops and the wiper also
stops.
• (c) Stop position: The wiper stops.
[6] BUZZER CANCELING SWITCH
For your safety, set the switch to the normal position for
work.
• (a) Cancel position:
The warning buzzer sound is stopped.
• (b) Normal position:
The warning buzzer tone sounds.
NOTES
The buzzer tone which can be cancelled is limited to the
buzzer tone
when a fault code is displayed.Other warning
sounds are not cancelled.