78
[7] ACCESSORY POWER SUPPLY
Accessory power supply is for 24V. Do not use this as power supply for equipment of 12V.
This can be used as an accessory socket.（100W (24V x
5A))
[8] HORN SWITCH
Use this switch to honk the horn.
When the switch on the knob part of the right work
equipment operation lever is pressed, the horn honks.
[9] ROOM LAMP SWITCH
Failure to turn off the switch causes the battery to be discharged. Be sure to turn the switch
to the "OFF" position after using the room lamp. The room lamp turns on when the starter
switch is at the "OFF" position.
Use this switch to turn on the room lamp.
• (a) "ON" position: The room lamp turns on.
• (b) "OFF“ position: The room lamp turns off.
To Next Page
Loading...
