Magicard Rio Pro - Print Head Replacement; Print Head Damage; Print Direction

Ultra Electronics Card Systems
Rio Pro Maintenance Manual
- 39 -
SECTION 10 PRINT HEAD REPLACEMENT
This section describes what action to take if you have to replace the Print Head in the Rio Pro/Rio Pro Duo Printer.
SECTION 10.1 PRINT HEAD DAMAGE.
Dust or contamination on the Card or Dye-Film is dragged below the Print Head. This causes scratches and permanently
damages the printing surface.
contaminant
such as sand.
Print
direction
The contaminant imbeds
into the PVC surface and
is dragged into the print
head.
Card
Dye-Film
Print Head