Magicard Rio Pro - Setting the Print Head Density Calibration

Ultra Electronics Card Systems
Rio Pro Maintenance Manual
- 42 -
Print Head Density
Programmer (PDP)
SECTION 10.4 SETTING THE PRINT HEAD DENSITY CALIBRATION.
CAUTION The Print Head Density Programmer (PDP) is calibrated to suit the Print Head that it is supplied with. It
will not be suitable for any other Print Heads and therefore should only be used for a specific Print
Head Assembly.
1
Open the
Printer Lid
Close the
Printer Lid
Press any Button to
switch the
Printer On !
Finished
