3-29
RT9150E OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
Published 2-23-2017, Control # 644-00
5
Left front outrigger;
F2
To operate any outrigger function:
• Swing gear must be OFF, red
• The parking brake ON, red
• Four-wheel drive engaged, yellow.
NOTE: With the swing gear ON, an
exclamation point is displayed
when selecting a function and
pre-selection does not take
place.
Press the associated button to pre-
select the indicated outriggers/jacks;
items (6), (9), (11) and (12) are for
jacks only:
Green dot
: Outrigger(s) pre-selected
and will remain selected for 10
seconds.
Black dot: Not selected.
After pre-selecting an individual
outrigger, items (13) through (16) are
active. Only items (13) and (14) are
active when jacks are selected.
• Press F14, extend outrigger button
(16) or F13, the retract outrigger
button (15) to move the outrigger(s)
out or in.
• Press F10, the extend jack button
(14) or F9, the retract jack button
(13) to move the jack(s) down or up.
6 Left side jacks; F3
7 Left rear outrigger; F4
8
Right front outrigger;
F6
9 Right side jacks; F7
10
Right rear outrigger;
F8
11 Front jacks; F11
12 Rear jacks; F12
13 Retract jack
cylinder(s), F9
14
Extend jack
cylinder(s), F10
15
Retract outrigger
beam(s), F13
16
Extend outrigger
beam(s), F14
Item Description Graphic Explanation
Reference Only