Manitowoc Grove RT9150E User Manual

OPERATING CONTROLS AND PROCEDURES RT9150E OPERATOR MANUAL
3-32
Published 2-23-2017, Control # 644-00
TELESCOPE SUBMENU
The following information describes the Telescope
Submenu, for information on extending/retracting the boom
refer to Telescoping the Boom, page 3-132.
Unlocking a telescopic section is required for the telescopic
section to be telescoped. The telescoping cylinder and the
telescopic section cannot be unlocked simultaneously.
Press the Telescoping submenu button (Figure 3-19) in the
main menu to open this submenu.
Telescoping Submenu
The telescope cylinder location (10) indicates which section
the buttons (1-3), lock status (5) and locking point alignment
(6) refer to.
Refer to the following table for a description of each item
listed above.
FIGURE 3-19
FIGURE 3-20
1
2
3
4
5
6
7
8
11
9
10
10
13
12
14
Item Description
1 Unlock section button, F1
2 Lock button, F2
3 Unlock telescope cylinder button, F3
4 Boom length status
5 Lock status display
6 Locking point alignment
7 Telescope cylinder status
8 Telescope function; on/off
9 Telescope cylinder length
10
Telescope cylinder location
Teleautomation on/off indicator
11 Telescope section display
12 Teleautomation direction indicator
13 Enter the value for teleautomation
14 Anemometer display
Reference Only

Manitowoc Grove RT9150E Specifications

General

Brand	Manitowoc
Model	Grove RT9150E
Category	Construction Equipment
Language	English