Manitowoc Grove RT9150E - TURNTABLE LUBRICATION

5-19
RT9150E OPERATOR MANUAL LUBRICATION
5
Published 2-23-2017, Control # 644-00
Grove
Item
Lube Point
Description
Figure
No.
Approved
Lubricant
Lube
Capacity
Lube Interval Application
Turntable
99 Swivel Lock Pin Figure 5-7
EP-OGL
Open Gear
Lubricant
6829104478
Coat entire
pin 500 hours or 6 months Spray on
100 Swing Drives Figure 5-7
SGL-5
Synthetic Gear
Lube - API
GL4+
SAE75W-90
02313611
1.0 quarts
(0.9 liters)
• Check and fill every
50 hours
• Drain and fill every
1000 hours or 12
months thereafter.
Fill to level on sight
gauge
CAUTION: Do not mix synthetic oil with mineral based oil.
101
Turntable Gear
and Drive Pinion
Figure 5-7
EP-OGL
Open Gear
Lubricant
6829104478
Coat all
teeth
500 hours or 6 months Spray on
102
Turntable
Bearing
Figure 5-7
EP-MPG
Extreme
Pressure
Multipurpose
Grease
6829003477
6829104275
Until
grease
extrudes
the whole
circumfer-
ence of the
bearing
500 hours or 6 months
4 grease fittings at
the front of the
turntable.
NOTE: Rotate the turntable 90° and apply grease to fittings. Continue rotating 90° and grease the fittings until the whole
bearing is greased.
103
Slew Angle
Sensor
Figure 5-7
EP-MPG
Extreme
Pressure
Multipurpose
Grease
6829003477
6829104275
Until
grease
extrudes
5000 hours or 60
months
1 grease fittings
104 Boom Pivot Pin Figure 5-7
EP-MPG
Extreme
Pressure
Multipurpose
Grease
6829003477
6829104275
Until
grease
extrudes
300 hours or 3 months 4 grease fittings
Reference Only