Manitowoc Grove RT9150E - Counterweight Stand Removal

SET-UP AND INSTALLATION RT9150E OPERATOR MANUAL
4-18
Published 2-23-2017, Control # 644-00
Counterweight Stand Removal
1. Attach an adequate lifting device with slings to a
counterweight stand (1) (Figure 4-18).
2. Remove the hitch pins (3).
3. Using the lifting device, remove a counterweight stand
(1) (Figure 4-18).
WARNING
Tipping Hazard!
The main boom must not be lowered below horizontal
when swinging over the front while the counterweight
supports are installed.
Serious injury, death or machine damage may occur.
7510-3
1
2
3
FIGURE 4-18
Reference Only